REMOVE SD MEMORY CARDS
Note!
Do not remove a memory card from the Camera
if the ‘ready’ light is blinking (placed in the
lower right corner on the Touch Display), as
this will corrupt the les on the card and result
in data loss. The card will also need to be
reformatted.
Remove SD card
1 Open the memory card slot cover on the
Camera (A).
2 Press the SD card no 1 (B) or no 2 (C) a
little way in and then release it. The SD card
will then move out from the SD card slot.
3 Grab the card and pull it away from the
Camera.
4 Close the slot cover (D) by rotating it counter
clockwise and pushing it in place towards
the front of the camera to lock it into
position.
A
B
C
D
X1D www.hasselblad.com
USER GUIDE
48
Functions
Table of Content
To Next Page
Loading...
