Hasselblad X1D-50c - Custom Modes; How to Set a Custom Mode

Exposure Modes
M, A, S, and P mode.
ISO
f
100
331
EV
12.0
5.6 125
1
2
0.0
M A S
P
EXPOSURE MODE
Manual
Program
Aperture Shutter
CUSTOM MODES
The Custom Modes C3, C2 and C1 are three Modes that can be
saved with your favourite settings.
HOW TO SET A CUSTOM MODE
1 Select a mode on the Mode Dial.
M, A, S or P. M is selected in this case (A).
2 Make the changes to the Camera Settings.
Set desired ISO, AF/MF and WB for example.
3 Press the Menu Button to the right of the Touch Display to
display the Main Menu.
4 Select General Settings.
5 Select Custom Modes.
6 Select Save to C1, C2 or C3.
7 Select Save to save and Exit or select Exit to exit without
saving.
8 All the settings you made will now be easily accessed from
the Custom Mode C1.
9 Turn the Mode Dial to select C1 (B).
10 You can now use the Camera with all the specic settings
made in stage 2 of this instruction.
Repeat the step 1 to 10 to create and use your 3 different
Custom Modes, C1, C2 and C3.
When the Mode Dial is set C1, C2 or C3, it is possible to change
exposure mode from the control screen by tapping the Exposure
Mode Icon in the lower left corner. This will bring up a screen as
shown in (C) where a new exposure mode is selected by tapping
the corresponding icon.
A
B
C
X1D www.hasselblad.com
USER GUIDE
38
Functions
Table of Content