Hasselblad X1D-50c - Page 49

FORMAT SD CARDS
MAIN MENU > GENERAL SETTINGS > STORAGE > FORMAT
The camera is only able to read and write to storage media that
have been formatted correctly. New cards sometimes have no
formatting, or you might want to convert a card that is currently
using a format that the camera cannot read. In either case, you
must reformat both SD cards within the X1D Camera to be able
to use the SD Cards.
FORMAT MEMORY CARDS ON THE TOUCH DISPLAY
MAIN MENU > GENERAL SETTINGS > STORAGE > FORMAT
1 Press MENU.
2 Navigate to Storage.
3 Navigate to Format.
4 Navigate to Format SD card.
5 Select “Format SD 1” or “Format SD 2”.
6 A Format Card Dialogue appears.
7 To conrm, select Format by pressing the Soft button marked
with a square (A). To exit without formatting, press the Soft
button marked with “X” (B).
Note!
The X1D Camera is capable of writing up to 80 MB/s to SD
cards.
Note!
All SD Memory Cards should be formatted in the X1D Camera
before using them the rst time.
Format Card Dialogue Display
!
Format SD1?
Format
Exit
All content will be erased!
Storage Menu
GENERAL SETTINGS: STORAGE
Format Card
Destination
Primary Slot: SD1
Secondary Slot Usage:
Backup
Format SD1
Format SD2
A
B
X1D www.hasselblad.com
USER GUIDE
49
Functions
Table of Content
GENERAL SETTINGS: STORAGE
Format Card
Destination
Primary Slot: SD1
Secondary Slot Usage:
Backup
Format SD1
Format SD2