Haussmann RL - INSTALLING SPLASHGUARDS

P/N 0387183_V 3-5
Reach-In
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
INSTALLING SPLASHGUARDS
The splashguard is shipped inside each merchan-
diser. after merchandisers have been leveled and
joined, and all drip piping, electrical and refriger-
ation work has been completed, re-install the front
color panel, then install the splashguards.
First, position top of splashguard over the top edge
of the bracket; second, push the lower edge of the
splashguard toward the bottom of the bracket until it
snaps into place.
Splashguards are joined with a galvanized metal
splice connector that comes with the joint kit. Join
the splashguards before installing on case.
Permit Number:
20-05195