Haussmann RL - Page 5

P/N 0387183_V
REVISION N — APRIL 2013
1. Inserted Joining Instructions,
Pages 1-8 - 1-22
REVISION M — MARCH 2013
1. Revised caution note on page 1-1; added to
Page 4-1.
REVISION L — AUGUST 2012
1. Updated instructions for moving case through
small doors, Section 1.
REVISION K — JULY 2012
1. Included instructions for clearing smaller store
entrances, Section 1. Ice cream note added to
Page 4-1.
REVISION J — APRIL 2012
1. Corrected Table of Contents, page iii.
REVISION I — NOT ISSUED
REVISION H — MARCH 2012
1. Amended Installing Drip Piping procedure,
Page 3-2.
REVISION G — MARCH 2010
1. Revised Installing Drip Piping procedure,
Pages 3-1 through 3-6.
REVISION F — DECEMBER 2009
1. Changed shimming drawing, Page 1-3.
2. Updated drip piping pitch, Page 3-1.
3. Added page division lines for thermometer,
Page4-3.
4. Added cleaning stainless steel rails,
Page5-2.
5. Added heater front and rear drawing,
Page6-3.
6. Updated warnings and cautions throughout
7. Added new back cover
REVISION E — JANUARY 2009
1. Added page division lines for thermometer,
Page 4-3.
2. Added heater front and rear drawing,
Page6-3.
3. Changed shimming drawing, Page 1-3.
REVISION D — SEPTEMBER 2007
1. Added front panel text and illustration, Page
1-2.
2. Clarified shimming directions, Page 1-3.
3. Added RLT information throughout.
4. Added note to remove bumper protective film,
Page 1-6.
5. Added information on Always*Clear™ glass,
page 5-1.
6. Removed reference to Anthony doors, Page
6-5.
7. Added repairing aluminum coil, Page 6-12.
8. Changed warranty page.
9. Added Installation Tool List, Page iv.
10. Added revision history, Page iv.
REVISION C — JUNE 2002
1. Added NSF information, Pages 1-1,4-2
through 4-4.
2. Sections 2 through 6 are completely
rewritten.
3. Changed warranty to March 15,2002.
Reach-In
HUSSMANN CORPORATION, BRIDGETON, MO 63044-2483 U.S.A.
Permit Number:
20-05195