Hayter RT380H - Checking Engine Oil Level

Batteryelectrolytecontainssulfuricacid,a
deadlypoisonthatcanseverelyburnyouand
others.
•Donotdrinkelectrolyteandavoidcontact
withskin,eyes,orclothing.Wearsafety
glassestoshieldyoureyesandrubbergloves
toprotectyourhands.
•Fillthebatterywherecleanwaterisalways
availableforushingtheskin.
•Followallinstructionsandcomplywithall
safetymessagesontheelectrolytecontainer.
2.Removetheventcapsfromthebattery.
3.Slowlypourelectrolyteintoeachbatterycelluntil
theelectrolytelevelisuptotheUpperlineonthe
batterycase(Figure7).
Important:Donotoverllthebatterybecause
electrolyte(sulfuricacid)canseverelycorrode
anddamagethechassis.
Figure7
1.Ventcaps3.Lowerline
2.Upperline
4.Wait5to10minutesafterllingthebatterycells.
5.Addelectrolyte,ifnecessary,untiltheelectrolytelevel
isuptotheUpperline(Figure7)onthebatterycase
6.Installthebatteryventcaps.
7.Chargethebatteryfor10to15minutesat25to30
ampsor30minutesat4to6amps(Figure8).Do
notoverchargethebattery.
Figure8
1.Positivepost
3.Chargerred(+)wire
2.Negativepost
4.Chargerblack(–)wire
Chargingthebatteryproducesgassesthatcan
explode.
Neversmokenearthebatteryandkeepsparks
andamesawayfromthebattery.
8.Whenthebatteryisfullycharged,unplugthecharger
fromtheelectricaloutlet,thendisconnectthe
chargerleadsfromthebatteryposts(Figure8).
9.Installthebatteryandbatteryboxinthetractorand
connectthebatterycables,usingthe2bolts(1/4x
3/4inch)andwingnutssuppliedinthelooseparts;
refertoInstallingtheBatteryinMaintenance.
6
CheckingtheEngineOilLevel
NoPartsRequired
Procedure
Beforeyoustarttheengineandusethetractor,check
theoillevelintheenginecrankcase;refertoChecking
theEngineOilLevel,inMaintenance.
13