HL-CHEM ORP & pH Sensing Kit for monitoring and controlling pool chemistry (requires
GLX-FLO flow switch)
HL-CHEM4-ACID Liquid acid feeder (requires GLX-FLO flow switch)
HL-CHEM4-CHLOR Liquid chlorine feeder (requires GLX-FLO flow switch)
CL200 Chlorine tablet feeder
AQR940/AQR925 Aqua Rite chlorine generator (requires HLAQRPCB)
Overview
The Hayward VS Omni is a web enabled pool automation control with a convenient touchscreen
interface. Automatically and remotely control the pumps, a heaters, valve actuators, pool and yard
lighting, pool chemistry equipment and more. The VS Omni offers the next generation of technology
to manage pool/spa equipment, allowing communication to web connected computers and mobile
devices. You can now conveniently monitor your pool/spa and change settings anytime, and from
anywhere.
Please read this manual thoroughly before attempting to install, configure or operate this unit. A
Quick Start guide may have also been included to offer concise information specific to your equip-
ment.
Features
The standard Hayward VS Omni offers the following functionality:
• controls up to 3 variable speed pumps* (VSPs) for pool/spa filtration and water features
• controls up to 3 Smart Relays to turn on/off single speed pumps, pool lights, yard lights, water
features, chemical dispensers and more
• controls up to two valve actuators allowing you to manage two bodies of water (both pool and
spa) or can be used for water features, cleaners, solar heating, etc.
• controls one conventional heater (electric heat pump or gas) and optional solar heater (for single
body of water applications only)
• inputs for up to 3 temperature sensors or external input devices
• built-in wireless to connect to the home’s router/access point (Ethernet port provided for optional
wired connection)
• optional flow switch used to protect pool equipment by detecting water flow
• controls an optional Sense and Dispense module (HL-CHEM) which monitors the pool's pH and
ORP and can dispense acid for pH control and chlorine for ORP control (requires additional equip-
ment)
• controls an optional Hayward Aqua Rite salt chlorinator. If controlled by the VS Omni, the Aqua
Rite must have a HLAQRPCB communication board installed
Optional accessories (page 3) can expand the functionality of the VS Omni. Determine your needs
and select the necessary accessories before you begin the installation.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
4
To Next Page
Loading...
Need help?
General
