To Next PageTo Next Page
Need help?Do you have a question about the Hayward hydrorite uvo3 and is the answer not in the manual?
General| Type | UV Disinfection System |
|---|---|
| Application | Residential |
| Lamp Life | 9000 hours |
| Inlet/Outlet Size | 2 inches |
| Operating Pressure | 50 psi maximum |
| Operating Temperature | 40°F to 104°F (4°C to 40°C) |
This product should be installed by a professional service technician or similar person qualified in electrical equipment installation.
Instructions for saving and retaining safety information for future reference.
Explanation of the HydroRite's UV and ozone sanitization process.
Technical details including plumbing diameter, power, and operating flow range.
List of components included in the HydroRite system package.
List of tools required for the installation of the HydroRite system.
General overview and initial steps for installing the HydroRite unit.
Guidelines for selecting a suitable and safe location for the HydroRite system.
Instructions for securely mounting the HydroRite controller unit.
Details on plumbing the HydroRite system, including bypass options.
Procedures for securing the vessel and plumbing its inlet/outlet connections.
Information on system head loss and the venturi assembly connection.
Guidance on making electrical connections for the HydroRite system.
Instructions for connecting the venturi tube, ballast cable, ozone tube, and interlock cable.
Connecting the flow switch and interlock cables to the HydroRite controller.
Information on connecting the HydroRite to a GFCI protected power outlet.
Steps for preparing pool water chemistry before operating the HydroRite.
Instructions for initial startup and automatic operation of the HydroRite.
Explanation of the status lights (LEDs) on the HydroRite controller.
General guidance for routine maintenance to ensure optimal performance.
Using an automatic cleaner to maintain the HydroRite's quartz sleeve.
Detailed, sequential instructions for manually cleaning the quartz sleeve.
Steps for cleaning the quartz sleeve and reassembling the unit.
Procedures for replacing the UV lamp and winterizing the unit.
Information on how to get service or assistance for the HydroRite unit.
Addresses compatibility of HydroRite with various pool chemicals.
Discusses whether UV light leaves a residual effect in the water.
Confirms compatibility of HydroRite with salt water systems.
Whether HydroRite needs to be turned off during filter cleaning.
Impact of pool timers on UV lamp life.
Requirement for vertical mounting of the HydroRite unit.
Possibility of using multiple HydroRite units for larger systems.
Discusses the residual effect of ozone produced by the HydroRite.
Explains the continued need for chlorine alongside HydroRite.
Diagnosing why the UV lamp may not light at start-up.
Troubleshooting steps when the UV lamp stops working during operation.
Identifying causes for unusual noises from the HydroRite unit.
Troubleshooting water leaks around the vessel cap.
Diagnosing the absence of bubbles indicating ozone generation.
Warranty period for the controller and vessel components.
Warranty period for the UV lamp, quartz sleeve, and related parts.
Conditions and events that are excluded from the limited warranty.
