Need help?Do you have a question about the HD DVB-S2 and is the answer not in the manual?
General| Brand | HD |
|---|---|
| Model | DVB-S2 |
| Category | Set-top boxes |
| Language | English |
Important warnings about water, fire hazards, power supply, and internal components.
Guidelines for cleaning, unit placement, power cord protection, and object entry.
Notes on moisture formation and precautions for parts replacement and safety checks.
Details board configuration, CPU, RAM, flash, tuner, and power supply.
Covers receiver standard, frequency range, signal level, and demodulation.
Lists MPEG profiles, audio/video outputs, and audio decoding formats.
Details A/V ports, USB, file systems, Ethernet, and storage temperature.
Covers multi-satellite support, LNB power, polarization, and access systems.
Describes DVR support, USB host functionality, and media file formats.
Explains the function of each button on the front panel (Power, Menu, OK, Vol, CH).
Explains the function of each port on the rear panel (Power, Ethernet, RS-232, HDMI, USB, CVBS, Audio, LNB).
Instructions for powering on the STB for the first time.
Troubleshooting common issues like no signal or no display.
Step-by-step guide to scanning for channels via satellite.
How to record shows, file saving, and pause/stop operations.
Answers common questions about recording, such as file saving duration and format.
Detailed explanation of each button's function on the remote.
Explains how to navigate the main menu using directional keys.
Introduces channel editing functions like list management, favorites, and locking.
Addresses what to do if channels are deleted accidentally.
Guides through initial antenna and satellite setup.
How to view, add, edit, and delete satellites.
Details how to configure antenna settings like LNB, DiSEqC, and motor.
How to set dish position and recalculate satellite positions.
How to set limits for dish movement.
Steps for scanning channels for a single satellite.
Guide for scanning channels from multiple satellites.
How to view, add, edit, and delete transponders.
Details editing and searching for transponder information.
How to restore a deleted transponder.
Configuring LNB power, channel types, and beeper settings.
Setting audio, subtitle, and teletext languages.
Configuring video resolution, aspect mode, and audio output.
Adjusting subtitle display, OSD timeout, and transparency.
Setting GMT, date, time, and summer time.
Configuring timers for recording or channel switching.
Setting up menu lock, channel lock, and new passwords.
Adjusting OSD timeout and transparency.
Viewing STB details and resetting to factory defaults.
Information about the common interface slot.
Configuring CA slot clock settings and system.
Instructions for upgrading firmware via USB.
How to dump STB system files to a USB drive.
Safe procedure for removing USB devices.
Displays details about connected USB storage devices.
Configuring PVR settings like timeshift and record jump.
Accessing media player for music, image, and video playback.
Managing recorded programs, including locking and renaming.
Setting up IP address, subnet mask, gateway, and DNS.
Loading and managing C-line configurations for CCcam.
Loading and managing MGCamd configuration files.
Configuring Twin Protocol settings.
Setting up Newcamd server parameters and user management.
To Next Page