Heat Controller RSGxxS-1D Series - WIRING DIAGRAMS; 10.1 Control Wiring for A;C Unit; Outdoor Unit Wiring Diagram for A;C Systems

10.0 WIRING DIAGRAM
CAUTION
These units must be wired and installed in accordance with all National and
Local Safety Codes.
THERMOSTAT
C
R ED
YE LLO W
GRE EN
Y
R
G
INDOOR UNIT
OUTDOOR UNIT
G
C
Y
BLACK
R
C
Fig.12 Control Wiring for A/C Systems.
BLACK
Fig.13 Outdoor Unit Wiring Diagram for A/C Systems(208/230V 1P 60Hz).
CC COMPRESSOR CONTACTOR
RC 1 RUN CAPACITOR 1
RC 2 RUN CAPACITOR 2
COMP COMPRESSOR
LINE VOLTAGE
FACTORY STANDARD
FIELD INSTALLED
OPTIONAL
LOW
FACTORY
VOLTAGE
FACTORY STANDARD
FIELD INSTALLED
FACTORY OPTIONAL
USE COPPER CONDUCTORS ONLY
WARNING :
CABINET MUST BE PERMANMENTLY GROUNDED
AND ALL WIRING TO CONFORM TO I.E.C, N.E.C,
C.E.C, C.L.C, AND LOCAL CODES AS APPLICABLE
REPLACEMENT WIRE MUST BE THE SAME GAUGE
AND INSULATION TYPE AS ORIGINAL WIRE.
ORANGE
A2
A1
T1
L1
BLACK
YELLOW
C
Y
Lug Plate
RC1
L1
L2
CC
L1
L2
GND
TATSOMREHTOT
10.1 Control Wiring for A/C Unit
23