heat-timer EPU-D - Page 29

EPU‐DDisplayandProgramming29
059840‐00Rev.AHeat‐TimerCorp.
SystemSettingsMenu
TheSystemSettingsmenuisusedtosetthesystemseason,day/nightsettings,boostadjust,systemsetpoint,
andthermallockoutsettings.
Season
Selections:Winter,Summer Default:Winter
MenuPath:/SystemSettings>Season
Description:
Setsthecurrentoperatingseason.
WhenWinterisselected,theEPU‐Dwilloperatethebuildingheatwhenevertheoutdoortemperaturefalls
belowtheCutofftemperature(see“DayCutoff”onpage 30and“NightCutoff”onpage 31).
WhenSummerisselected,theEPU‐Dwillnotenergizetheboilerburnerormotorizedvalveactuator.
NOTE:WhenSeason=Summer,theSeasonsettingislocatedinthe/Menu>Seasonmenu.