Heathkit W-5M - Shipping Instructions

The Heath
Company
will
promptly supply
the
necessary replacement. Please do
not return the
original component
until
specifically requested
to
do so.
Do
not
dismantle
the component in
question as this
will
void the
guarantee.
If tubes are
to
be
returned,
pack them
carefully
to
prevent breakage
in
shipment as
broken tubes
are
not eligible for
replacement.
This
replace-
ment
policy does
not
cover the
free replacement of
parts that may have
been
broken or
damaged
through
carelessness on
the part of the kit
builder.
SERVICE
In
event
continued
operational
difficulties of the
completed
instrument
are
experienced,
the fa-
cilities
of the Heath
Company
Service Department
are
at your
disposal.
Your
instrument
may
be
returned for
inspection
and repair fora
service
charge of
$5.00
plus
the
cost
of any
additional
material that may be
required.
THIS SERVICE
POLICY
APPLIES
ONLY
TO
COMPLETED
INSTRUMENTS
CONSTRUCTED IN
ACCORDANCE WITH THE
INSTRUCTIONS
AS
STATED
IN THE
MANUAL.
Instruments that are
not
entirely completed or
instruments
that
are
modified
in
design will
not
be
accepted
for
repair.
Instruments showing evidence
of
acid
core
solder
or
paste
fluxes will
be
returned
not repaired.
The Heath
Company is
willing to
offer its
full cooperation
to assist you in
obtaining
the
specified
performance
level in
your
instrument. Factory
repair
service is
available for
a
period of
one
year
from the
date
of
purchase
or you may
contact
the Engineering
Consultation Department
by
mail. For
information regarding the
possible
modification
of existing kits,
the
current issues
of technical
periodicals are
recommended. They
can be
obtained
at
or through
your
local lib-
rary,
as
well as at
any
electronic
outlet store.
Although the HeathCompany
welcomes
all
com-
ments
and suggestions,
it would be
impossible
to
design, test,
evaluate
and
assume
responsib-
ility
for proposed circuit
changes
for specific
purposes.
Therefore,
such
modifications
must
be
made
at the
discretion of the
kit builder
according
to
information
which will
be
much more
readily available
from some
local
source.
SHIPPING
INSTRUCTIONS
Before
returning
a
unit
for service, be sure
that all parts are
securely
mounted.
Attach a tag
to the
instrument
giving name,
address
and trouble
experienced.
Pack
in
a
rugged
container
,
preferably
wood, using
at least
three
inches
of shredded
newspaper or
excelsior
on
all
sides
.
DO NOT SHIP IN
THE
ORIGINAL
KIT CARTON AS
THIS
CARTON IS
NOT
CONSIDERED
ADEQUATE FOR SAFE
SHIPMENT
OF
THE
COMPLETED
INSTRUMENT.
Ship
by
prepaid
express
if
possible.
Return shipment will be made by
express
collect.
Note
that
a
carrier can-
not
be
held liable for damage
in transit if
packing,
in
HIS
OPINION,
is
insufficient.
SPECIFICATIONS
All prices are
subject
to change
without
notice.
The Heath
Company
reserves
the right
to
dis-
continue
instruments
and to change
specifications at
any time
without
incurring any
obligation
to
incorporate new
features
in instruments
previously sold.
WARRANTY
The
Heath Company
limits
its
warranty of
parts
supplied
with
any
kit to a
period
of three
(3)
months
from
the date
of
purchase.
Replacement
will be
made
only when
said
part is
returned
postpaid,
with prior
permission
and in the
judgment
of the
Heath
Company was
defective at
the
time
of sale.
This
warranty
does not
extend
to
any
Heathkits
which have
been
subjected
to mis-
use,
neglect,
accident and
improper
installation
or
applications.
Material
supplied
with a kit
shall
not
be
considered
as
defective,
even
though
not in exact
accordance
with
specifications,
if
it
substantially
fulfills performance
requirements.
This
warranty is
not
transferable
and
ap-
plies
only
to
the
original purchaser.
This
warranty is
in
lieu
of all other
warranties
and
the
Heath
Company
neither
assumes
nor authorizes
any
other person to
assume
for them
any
other
liability
in
connection
with the
sale
of Heathkits.
The
assembler
is
urged
to follow the
instructions
exactly
as
provided.
The
Heath
Company
as-
sumes
no
responsibility
or liability for
any damages
or
injuries
sustained
in
the
assembly
of
the
device or
in
the
operation
of the completed
instrument.
HEATH
COMPANY
Benton Harbor, Michigan
Page 30