14
THE FOLLOWING SETTINGS ARE OPTIONAL
AND IN MOST CASES NEED NOT BE ADJUSTED
Optional Features Explained
Feature 01 - Temperature Format: This function allows you
to select between °C and °F.
Feature 02 – Switching Differential: This function allows
you to increase the switching differential of the thermostat.
The default is 1°C which means that with a set temperature of
20°C, the thermostat will switch the heating on at 19°C and off
at 20°C. With a 2°C differential, the heating will switch on at
18°C and off at 20°C.
Feature 03 – Frost Protect: You can set whether the
thermostat will maintain the frost temperature when the
thermostat display is turned off. As a default, this is enabled.
Feature 04 – Frost Protect Temperature: This is the
temperature maintained when the thermostat is in frost mode.
The range is 07 - 17°C. The default is 12°C and is suitable for
almost all applications.
To Next Page
Loading...
