Heatmiser JG PRT-E - Temperature Display; Setting the Clock

7
Temperature Display
Room Temp = This is the current room temperature.
SET = This is the temperature you are trying to achieve in your
home.
Setting the Clock
To set the clock, follow the steps below:
• With the thermostat turned on, press the Clock button twice.
• You are now able to set the minutes using the Up/Down
keys.
• Press H to accept.
• You are now able to set the hours using the Up/Down keys.
• Press H to accept.
• You are now able to set the day of the week using the Up/
Down keys.
• Press A to store and exit.