When these safety symbols appear on the following pages, they will alert
you to the possibility of serious injury if you do not comply with the corre-
sponding instructions. The hazard may originate from something mechani-
cal or electrical shock. Please read the instructions carefully.
When you see this safety symbol on the following pages, it will alert you
to the possibility of damage to your HEATMOR™ Stainless Steel Outdoor
Furnace if you do not comply with the corresponding instructions. Please
read the instructions carefully.
The HEATMOR™ Stainless Steel Outdoor Furnace is certied to offer safe
service provided it is installed, operated and maintained in accordance with
the instructions contained in this manual.
Proper personal protective equipment (PPE) MUST BE WORN AT ALL
TIMES when servicing and maintaining any of the HEATMOR™ Stainless
Steel Outdoor Furnace product line.
This manual describes the installation and operation of the HEATMOR™
200X and the HEATMOR™ 350X cataytic equipped wood heater. These
heaters meet the 2015 U.S. Environmental Protection Agency’s crib wood
emission limits for wood heaters sold after May 15, 2015. Under specic
test conditions the 200X can output 54,019 Bru/hr. Under specic test con-
ditions the 350X catalytic equipped wood heater can output 89,753 Bru/hr.
This wood heater has a manufacturer-set burn rate that must not be altered.
It is against federal regulations to alter this setting or otherwise operate
this wood heater in a manner inconsistent with operating instructions in
this manual.
The 350X contains a catalytic combustor, which needs periodic inspection
and replacement for proper operation. It is against federal regulations to
operate this wood heater in a manner inconsistent with operating instruc-
tions in this manual, or if the catalytic element is deactivated or removed.
ii
To Next Page
Loading...
