EasyManua.ls Logo

Heatmor 200X - Air Box Function and Maintenance; Air Box Principle and Maintenance

Heatmor 200X
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
Air Box(s)
Principle
The air box is designed to distribute the appropriate percent-
age of air from the blower, into different areas of the rebox
so the re will burn efciently and clean.
Maintenance / Result
Check for ashes in the air box. If ashes are in the air box,
they may interfere with the opening and closing of the ipper.
If ashes cover the air outlets, less air will get into the rebox.
When raking ashes, be careful not to pull the ashes over
or into the air box. Be certain the ashes are cold before
attempting to remove ashes from the air box.
To maintain the air box, remove the blower / ipper assembly
and clean the ashes out of the air box with a mini-vacuum,
brush or your hand. You may need to loosen up hard packed
ashes. Securely fasten the blower / ipper assembly back
onto the large air tube ensuring there are no air leaks.
Air Box
Back Air Box 350X

Table of Contents