HeatPumps4Pools LCSPC-40 User Manual

16
PARAMETER CHECKING AND ADJUSTMENT
Parameter list
Some parameters can be checked and adjusted by the controller. Below is the parameter list.
No
Parameter Name
Range
Default
Remark
0
Memory function if power off
0（no）\1（yes）
1
Adjustable
1
Timer cycle (every day or once)
0（once）\1（every day）
1
Adjustable
2
X (Temp difference btw. inlet water
temp and setting water temp to start
compressor)
2-10℃
3
Adjustable
3
Y (Temp difference btw. inlet water
temp and setting water temp to stop
compressor)
0-3℃
0
Adjustable
4
The interval for defrosting
30-90Min
40Min
Adjustable
5
Defrosting entry coil temperature
-30℃ “-” not display）
-7℃ (only
display “7”)
Adjustable
6
Defrosting-off coil temp.
2-30℃
20℃
Adjustable
7
Defrosting max. lasting time
0-15Min
8Min
Adjustable
8
Compressor exhaust gas protection
90-120℃
(B8) ℃
（B8
stands
for
118℃）
Adjustable
9
Max Pool water temp set
40~65℃
40
Adjustable
10
Water pump running mode
0（Special）\1（Normal）
0: When target water temp
reached and unit
shutdown, water pump
keeps running.
1: Water pump stops for
15 minutes (adjustable by
Parameter 11) after
compressor shutdown for
30 seconds, then water
pump starts running for 2
minutes.
NOTES: Under unit OFF
mode, if water pump
stops running for 12
hours, then water pump
will start running for 2
minutes.
1
Adjustable

HeatPumps4Pools LCSPC-40 Specifications

General

Brand	HeatPumps4Pools
Model	LCSPC-40
Category	Swimming Pool Pump
Language	English