20 / 32
PL
SK
DE
EN
CS
HU
• Do not work with damaged, incomplete device, or device adjusted without the consent of
the manufacturer. Never use the device with defective protective equipment. Before use,
check device condition, particularly power connections, switches and protective covers.
WORK AREA
• Do not operate in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Product create sparks which may ignite the dust or fume.
• Check the terrain where you are going to use the machine, and remove any objects that
could be caught, tangled, or discarded (stones, shards of glass, nails, wires, toys, sticks, etc.).
Only operate the machine on a safe surface and only in good light!
• Never use the machine during rain and storms, especially if there is a risk of lightning strikes.
• Never use the machine on a slippery surface.
• While working, make sure that you stand firmly. Be particularly careful when working on
sloping terrain.
PROTECTIVE EQUIPMENT
• Wear appropriate clothing at work. Don’t wear loose clothing or jewellery, tie up your hair.
Loose clothes, jewellery or long hair can be caught in moving parts.
• Wear approved eye protection! The operation of machine can result in foreign objects being
thrown into your eyes which may result in severe eye damage. Normal glasses are not sufficient
for eye protection. For example, corrective glasses or sunglasses do not provide adequate
protection because they have not special safety glass and aren’t enough closed from the sides.
• Wear adequate noise protection equipment! The impact of noise can cause hearing damage
or hearing loss. Take frequent work breaks. Limit the amount of exposure per day.
• Always wear sturdy shoes with nonslip soles. Risk of damaging the legs or risk of slipping on
wet or slippery ground. This protects against injuries and ensures a good footing.
• While working, always wear long trousers. Do not operate the machine when barefoot or
wearing open shoes.
• Safety equipment such as a dust mask or hard hat used for appropriate conditions will
reduce personal injuries, especially when the machining operation creates dust or there is
a risk of hitting your head on protruding or low level obstructions.
PERSONAL PROTECTION AND FIRST AID
Note: I
we recommend always having:
• A suitable fire extinguisher (froth extinguishing, snow, powder, halotron) at your disposal.
• A fully equipped first-aid kit, easily accessible for accompaniment and operator.
• Mobile phone or other device for quickly calling emergency services.
• Accompaniment familiar with the principles of first aid.
C Accompaniment must keep a safe distance from the workplace while always seeing you!
• Always follow the principles of first aid in case of any injuries.
• If there is a cut, cover the wound with a clean bandage (fabric) and press down firmly to
stop the bleeding.
• If persons with circulatory problems are often exposed to excessive vibration, they
may experience injury to blood vessels or their nervous system. The vibrations may cause
the following symptoms appear on fingers, hands or wrists: numbness, itching, pain, tingling,
changes in skin colour or of the skin itself. If any of these symptoms occur, consult a doctor.
To Next Page
Loading...