20 / 33
PL
SK
DE
EN
CS
HU
RESIDUAL RISKS
Even if the product is used according to instructions, it´s impossible to eliminate all the risks
associated with its operation. The following risks may occur arising from product construction:
• Mechanical dangers and hazards related to parts of the machine or workpieces caused by
shape, location, weigh, strength and mechanical strength.
• Danger related to compression, shearing, cutting (e.g. injuries), winding, pulling or trapping.
• Danger of injecting, spraying or splashing of the high-pressure liquid
• Electrical hazard caused by touch with live electrical parts (direct contact) or with parts,
which came under voltage due to failure of the product (indirect contact).
• Dangers caused by neglecting the ergonomic principles when using a product related
to unhealthy posture or excessive strain, anatomy of the hand or leg, human error and
behaviour, local lighting (lamps), construction or location of the remote controllers.
• Danger of unexpected start, unexpected overrun / overspeed or any failures due to error
or mistake and loss of functionality of the control system, restoration of power supply or
external influences on the el. device.
• Dangers caused by the inability to stop the product in the best possible conditions.
• Dangers related to power failures, control circuit failures, installation and wiring errors, dissolution
during operation, loss of stability / overturning of the machine, fall, ejection of the objects.
• Noise risk resulting in loss of hearing (deafness) and other physiological disorders (e.g. loss
of balance, loss of consciousness).
• Vibration risk (resulting in vascular and neurological harm in the hand-arm system, for
example so called “white finger disease”).
WARNING! B
The product produces an electromagnetic field of a very weak intensity. This field
may interfere with some pacemakers. To reduce the risk of serious or fatal injury,
persons with pacemakers should consult the use with their physician.
UNPACKING
• Carefully check all parts after dismantling the transport box.
• Do not throw away packaging materials until you have not reviewed carefully if they did not
remain a part of the product.
• Parts of the packaging (plastic bags, paper clips, etc.) do not leave within reach of children,
could be a possible source of danger. There is a danger of swallowing or suffocating!
• If you notice transport damage or while unpacking, notify your supplier immediately. Do not
operate the product!
• We recommend save the package for future use. The packaging materials must still be
recycled or disposed of in compliance with the relevant legislation. Sort different parts of
the packaging according to material and hand it to the appropriate collection sites. For
further information contact your local administration.
C Fasteners can become loose during transport in the packaging.
PACKAGE CONTENTS
1x machine body; 1x supporting leg; 1x accessories for assembly; 1x manual for use, Guard
Bottom Plate, 2x Log Tray, Plate connector, 2x Top Guard Plate, 2x Rear Guard Plate, Front
Guard Plate, Left Guard Plate
To Next Page
Loading...