hecht 670 - TRANSPORT; TROUBLESHOOTING

27 / 33
PL
SK
DE
EN
CS
HU
• Cover unit with a suitable protective cover that does not retain moisture. Do not use sheet
plastic as a dust cover. A nonporous cover will trap moisture around the machine, promoting
rust and corrosion.
TRANSPORT
Turn the motor off and disconnect the mains plug. When transporting, be careful not to drop,
or otherwise shock the machine. For transport, the machine has to be fixed against slipping and
tipping over. Do not place objects on the machine.
• The wedge splitter is equipped with 2 wheels for smaller movements.
• Always tighten the Bleed Screw before moving,
• Grip the handle to tilt the log splitter slightly
C If using a crane, lay hoist sling around the housing. Never try to lift the log splitter
at the handle.
TROUBLESHOOTING
CAUTION! A
You cannot rectify disorders that require more intervention yourself.
If you‘re unable to rectify the fault using the corrective measures described below,
contact a specialist garage, preferably an authorised service centre.
Improper handling can cause damage or serious injuries.
PROBLEM PROBABLE CAUSE CORRECTIVE ACTION
Motor does not start
No current in the socket Check mains fuse
Electrical extension line defective Unplug, check and replace.
Switch or capacitor defective Have checked by Electrician
Log splitter does not
work while motor
running
Control levers or connection parts
bent.
Repair the bent parts
Lower hydraulic oil level Check and refill hydraulic oil
Splitter works with
abnormal vibrations
and noise
Lower hydraulic oil level Check and refill hydraulic oil