18 / 32
PL
SK
DE
EN
CS
HU
• Wear adequate noise protection equipment! The impact of noise can cause hearing damage
or hearing loss. Take frequent work breaks. Limit the amount of exposure per day.
• Always wear sturdy shoes with nonslip soles. Risk of damaging the legs or risk of slipping on
wet or slippery ground. This protects against injuries and ensures a good footing.
• Safety equipment such as a dust mask or hard hat used for appropriate conditions will
reduce personal injuries, especially when the machining operation creates dust or there is
a risk of hitting your head on protruding or low level obstructions.
PREVENTION AND FIRST AID
Note: I
We recommend always having:
• A suitable fire extinguisher (snow, powder, halotron) at your disposal.
• A fully equipped first-aid kit, easily accessible for accompaniment and operator.
• Mobile phone or other device for quickly calling emergency services.
• Accompaniment familiar with the principles of first aid. Accompaniment must keep
a safe distance from the workplace while always seeing you!
C Always follow the principles of first aid in case of any injuries.
• When an electric shock is caused, it is necessary more than anywhere else to put emphasis
on safety and risk elimination for the rescuers. The affected person usually stays in contact
with electrical equipment (source of injury) because of muscle spasms caused by the electric
shock. Traumatic process continues in this case. It is therefore necessary to TURN THE
POWER OFF FIRST using any possible way. Subsequently CALL AN AMBULANCE or other
professional service, and then PROVIDE FIRST AID! Ensure free airways, check breathing,
check pulse, put the affected flat on their back, bend their head and stick out their lower
jaw. If necessary, begin with artificial respiration into the lungs and heart massage.
IN CASE OF FIRE:
• If the motor starts to burn or it the smoke appears from it, turn the product off, disconnect
power supply and move away to safety.
• To extinguish the fire, use suitable fire extinguisher (CO
2
, Dry Powder, halotron).
• DO NOT PANIC. Panic can cause even more damage.
UNPACKING
• Carefully check all parts after unpacking the product from the box.
• Do not throw away packaging materials until you have not reviewed carefully if they did not
remain a part of the product.
• Parts of the packaging (plastic bags, paper clips, etc.) do not leave within reach of children,
could be a possible source of danger. There is a danger of swallowing or suffocating!
• If you notice transport damage or while unpacking, notify your supplier immediately. Do not
operate the product!
• We recommend save the package for future use. The packaging materials must still be
recycled or disposed of in compliance with the relevant legislation. Sort different parts of
the packaging according to material and hand it to the appropriate collection sites. For
further information contact your local administration.
C Fasteners can become loose during transport in the packaging.
To Next Page
Loading...