19 / 36
SAFETY INSTRUCTIONS
WARNING! B
Before you put this machine into operation you have to read instructions in this manual.
Read these instructions before initial operation. Pay special attention to the safety instructions.
PURPOSE OF USE
This appliance is approved solely for use
- in accordance with description and safety instructions specified in this user´s manual
- sharpening of saw chains
Any other use is not as intended. Improver use is not covered by the warranty and the manufacturer
will reject any liability. The user is liable for all damage caused to third parties and their property.
Unauthorized modifications made to machine rule out any liability on the part of the manufacturer
for damage resulting therefrom.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Do not overload machine – use it only within the performance range it was designed for.
GENERAL SAFETY INSTRUCTIONS
WARNING! B
When using this machine, observe the following safety instructions to exclude
the risk of personal injury or material damage. Please also observe the special safety
instructions in the respective chapters. Where applicable, follow the legal directives
or regulations for the prevention of accidents pertaining to the use of machine.
When using this machine, basic safety precautions, including the following, should always
be followed to reduce the risk of serious personal injury and/or damage to the unit.
CAUTION! A
This machine produces an electromagnetic field during operation. This field may
under some circumstances interfere with active or passive medical implants. To
reduce the risk of serious or fatal injury, we recommend persons with medical
implants to consult their physician and the medical implant manufacturer before
operating this machine.
TRAINING
CAUTION! A
The operators must receive proper training in the use, adjustment and operation of
the machine, including prohibited operations.
HECHT_9230_manual_2020_EN.indd 19HECHT_9230_manual_2020_EN.indd 19 12.10.2021 15:43:1412.10.2021 15:43:14
To Next Page
Loading...