HeimVision HM205 - 1. Connecting by Scanning the QR Code

1.ConnectingbyScanningtheQRCode
+
Step1:
ConnectthemobiledevicetoyourWi-Fi,thenloginto
Pixplus.Tapintheupperrightcorner,thenselect
IntelligentcameraandDeviceaddingbyscanningthecode;
Step2:
TickIfyouhavefinishedtheabovesteps,clickConnectto
theNetwork,thentapConnecttothenetwork.Selectthe
Wi-Fiyourmobiledeviceisconnected,enterthecorrect
passwordandtapNexttocontinue;
GUIDE
PixPlus
The starter guide video
Add the d evice
Intelligent camera
Smart annunciator
Add the d evice
Device adding by sca nni ng
the code
Pai r with Wi -Fi by sc annin g QR code
on th e mobil e phone
AP
Addition by connec tin g to
network cable
Onl y appli cable f or the de vice wi th the
net work ca ble soc ket
Addition of AP hotspot
Pai r with Wi -Fi by co nnect ion wit h AP
hot spot of t he devi ce
1 2 3
03
support@heimvision.com