Heinzmann PANDAROS III DG 16.6 User Manual

10 Regulating linkage
32 Digital Governor Basic System PANDAROS III
10.3.1 Linkage adjustment for diesel engines
The length of the connecting linkage is adjusted in such a way that with the governor in
stop position the injection pump is set to 0 - 2 fuel marks. (Travel of the injection pump
control rack is limited by the governor.)
Patents pending
Range Voltage
for BasicSystem E
Serial No.
R
GmbH + Co.
HEINZMANN
Am Haselbach 1
D-79677 SchÎna u
Germany
Telefon: (0 7673) 8208-0
Telefax: (07673) 8208-88
Diese Schraube darf nicht verstellt werden!
Never turn this screw!
Ne pas toucher a cette vis!
Füllung Fuel Combustible
100
50
0
pressure elastic member
stop
stop
displacement
angle
injection pump
actuator
0 - 2 fuel mark
full load position
Fig. 13: Linkage for diesel engines
The resistance of the pressure elastic link is overcome when the control rack has reached
the full load stop and the speed continues to decrease (overload). Furthermore, the elastic
link is overcome when stopping via the emergency switch.

Heinzmann PANDAROS III DG 16.6 Specifications

General

Brand	Heinzmann
Model	PANDAROS III DG 16.6
Category	Controller
Language	English