28
It is possible to freely congure the HELIX
DSP ULTRA with our DSP PC-Tool software.
The user interface is designed for easy handling of
all functions and allows an individual adjustment of
each of the twelve DSP channels. Prior to connect-
ing the signal processor to your PC visit our web-
site and download the latest version of the DSP
PC-Tool software.
Check from time to time for software updates. You
will nd the software and the respective user manu-
al on www.audiotec-scher.com.
We strongly recommend to carefully read the user
manual (Sound Tuning Magazine) before using the
software for the rst time in order to avoid any com-
plications and failures.
Important: Make sure that the signal processor is
not connected to your computer before the software
and USB driver are installed!
In the following the most important steps how to
connect and the rst start-up are described:
1. Download the latest version of the DSP
PC-Tool software (available on our website
www.audiotec-scher.com) and install it on
your computer.
2. Connect the signal processor to your comput-
er using the USB cable that is included in de-
livery. If you have to bridge longer distances
please use an active USB extension cable with
integrated repeater or the optionally available
WIFI CONTROL interface.
3. First turn on the signal processor and then start
the software. The operating software will be up-
dated automatically to the latest version if it is
not up-to-date.
4. Now you are able to congure your HELIX
DSP ULTRA with our intuitive DSP PC-Tool
software. Nevertheless, interesting and useful
hints can be found e.g. in our “Sound Tuning
Magazine”, which can be downloaded for free
from our website.
Caution: We highly recommend to set the vol-
ume of your car radio to minimum position during
rst start-up. Additionally no devices should be
connected to the signal processor until general set-
tings in the DSP PC-Tool software have been made.
Especially if the DSP ULTRA will be used in fully
active applications, a wrong setup can destroy your
speakers right away.
Connection to a PC
To Next Page
Loading...
Need help?
General
