22
English
|
Nederlands
|
Français
|
Deutsch
12. TECHNICAL CHARACTERISTICS
This thermostat can be used in conditions described below:
11. MAINTENANCE
Cleaning of the thermostat
Gently dust the outside of the thermostat with
a soft, lint-free cloth.
If the thermostat needs a more thorough
cleaning:
- Lightly dampen a soft and clean cloth with
water.
- Wring out any excess water from the cloth.
- Gently wipe the display and sides of the
thermostat, making sure no drops of water
accumulate around the product.
Important: Do not spray thermostat directly
with water, or use cleaning solutions or polish-
es, as doing so may damage the thermostat.
IP20
0°C to 50°C (32°F to 122°F)
24AC to 230VAC
NTC 10kΩ at 25°C
24VAC: Max. 5 actuators (1,6W/actuator)
230VAC: Max. 8 actuators (1,8W/actuator)
Comfort / Reduced / Anti-freeze 5 to 35°C /
5 to 35°C / 0.5 to 10°C / (increments of 0.5°C)
Proportional band (cycles 15-30-45-60 min)
or hysteresis 0.2°C to 3.0°C
Class IV (2%)
-20°C to 60°C (-4°F to 140°F)
In option
IP
Ambient operating temperature
Power Supply
Temperature sensor Internal
and/or external (optional)
Power output Live Triac, NO or NC
Temperature ranges
Regulation type
ERP
Storing temperature
Internal humidity sensor
To Next Page
Loading...
