L
Analog Line Input (LINE IN)
Used to connect audio devices with a stereo RCA cable.
(v p. 15)
M
AUX Input (AUX IN)
Used to connect audio devices with a 3.5 mm cable. (v
p. 15)
Used to add the speaker to your wireless network. (v p. 18)
N
Connect Button (CONNECT)
Used for Wi-Fi setup.
O
Connect in Status LED
Indicates the status of this unit. (v
p. 52)
Contents Setup Use Troubleshooting Status LED Appendix
12
To Next Page
Loading...
