Heraeus Digilance V - Advanced Operation (Wireless); Wireless Communication; 5.1 Wireless ID; 5.2 Wireless Mode

26 November 2018 Digilance V page 15 of 21
File name: Digilance V_1.01
Version: 1.01
4.7 Power Management
After the initial activation, the instrument will Power-On by movement. This behavior can be adjusted with the
Power Management settings (See Section ‘Instrument Configuration’):
Configuration Section
ID
Function
Awake Time
4.1
Determines how long the instrument will remain awake after activity.
Set the values to ‘ALWAYS’ to manually power the instrument On and Off.
Motion Sensitivity
4.2
Controls the accelerometer sensitivity, to avoid that the instrument is
powered On by vibrations.
Transport Mode
4.3
• Transport Mode can be activated by:
o By pressing and holding and for 3 seconds
o By setting Configuration Option 4.3 to ‘Yes’
• If Transport Mode is active, the instrument must be re-activated by
pressing and holding