46
Use your software and listen for any artifacts, audio
glitches (clicks, pops) and latency problems: should any
of these issues arise, you will need to adjust the buffer
sizes accordingly.
Close your software and adjust your ASIO buffer by one
value at a time:
− Reduce the buffer size to reduce latency.
− Increase the buffer size if you notice glitches or
artifacts in the audio.
You will need to repeat this procedure until you find the
optimal buffer size for your system.
The drivers are available here:
https://support.hercules.com/product/djcontrolinpul
se200mk2/.
To Next Page
Loading...
Need help?
General
