Hercules DJControl Inpulse 500 User Manual

Lighting test
Click the light bulb icon in the bottom left-hand corner of the control
panel, to light up the controller’s LEDs: when the icon is green, the LEDs
are lit up.
6.4. Disabling the audio input
The Microphone and Auxiliary audio input is enabled by default via
hardware mixing (i.e. without going through the DJ software being used).
If you wish to disable the input, click the icon representing the MIC and
AUX IN input (linked to output 1-2).
A red X appears on this icon if the sound from the input is no longer being
played on output 1-2.

Hercules DJControl Inpulse 500 Specifications

General

Type	DJ Controller
Decks	2
Mixer Channels	2
Audio Interface	24-bit / 44.1 kHz
Crossfader	Yes
Compatibility	Windows, macOS
MIDI	Yes
Pitch Control	Yes
Built-in Sound Card	Yes
Performance Pads	8
Outputs	RCA (Master), 1/4" (Booth)
Inputs	RCA (Aux)
Software	DJUCED
Dimensions	540 x 250 x 70 mm
Weight	3.2 kg
EQs	3-band per channel
USB	1 x USB Type-B
Jog Wheels	2 (motorized)