Name: Hercules DJControl Inpulse 500
Brand: Hercules
Rating: 4 (1 reviews)

To Next Page

To Previous Page

8. Tips and tricks

8.1. Switching on all of the LEDs

Press the Loop In and Loop Out buttons on decks 1 and 2.

8.2. Switching on/switching off the 4 LEDs under the

controller’s feet

Press pads 1 and 5 on deck 1, along with pads 4 and 8 on deck 2.

8.3. In Serato DJ Lite

Changing the tempo scale (from 8% to 16% or 50%)

Press the Shift + Quant buttons.

Moving the tempo scale while maintaining the same precision

Enable Sync mode on the virtual deck, press the Shift button and move

the tempo fader: the software stops following the tempo fader’s

movement while the Shift button is held down, and resumes following its

direction of movement when the Shift button is released.

Example: switching from a tempo scale of -8% – +8% to +8% – +24%.

1) Enable Sync.

2) Move the tempo fader completely to the bottom (+8%).

3) Press the Shift button and move the tempo fader completely to

the top: the software remains at +8%.

4) Release the Shift button: the minimum position (at the very top)

gives you a tempo at +8%, while the maximum position (at the

very bottom) is at +24%.

Other manuals for Hercules DJControl Inpulse 500

Questions and Answers:

Need help?

Do you have a question about the Hercules DJControl Inpulse 500 and is the answer not in the manual?

General