HermanMiller Mirra
®
2 Chair Adjustment Guide1
HermanMiller
Mirra
®
2 Chair
To raise:
Take your weight o chair, li tab up.
To lower:
Li tab up while seated.
At the proper height, your feet should rest flat on the floor with upper and
lower leg forming a 90 degree angle.
Seat Height: Lower right side of seat
To adjust:
Squeeze handle and adjust seat edge
up or down. Release handle to lock in
position.
In the proper position, you will have a minimum of three-ngers of clearance
between the back of your knees and the front seat edge.
FlexFront
®
Seat Depth: Handle under front of seat
To increase:
Turn knob clockwise.
To decrease:
Turn knob counterclockwise.
Set the tilt tension to control the resistance you feel when reclining.
Harmonic
™
Tilt Tension: Knob below right front side of seat
To engage:
Recline and flip lever down.
To release:
Recline and flip lever up.
Engage forward tilt to support the thigh’s declined posture when performing
intensive tasks, such as keyboarding.
Note: When using forward seat angle, increase seat height slightly for
added comfort.
Forward Tilt: Horizontal tab on le front side of seat
Only available on some models.
To Next Page
Need help?
General
