EasyManua.ls Logo

HERO Archimede - General Conditions for Operation

HERO Archimede
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
General Conditions
By choosing the ARCHIMEDE A100-A150 automatic colourant dispenser manufactured by
HERO EUROPE, you have selected a product which represents the result of intensive
research in the field of high-tech fluid dispensing equipment. Top quality materials, modern
designing tools such as the use of CAD three-dimensional parametrical systems, together
with the attention given to ergonomics, guarantee an easy to use, long lasting machine.
The dispenser is in compliance with the 89/392/EEC directive regarding machinery, the
89/336/EEC directive regarding electromagnetic compatibility, as well as the 73/32/EEC
directive regarding electrical equipment to be used within a specific voltage range
compiled by the European Community Council of Ministers, and is provided with the EC
trademark.
The handbook explains how to install a HERO EUROPE automatic dispenser and provides
all the necessary information in order to insure easy use and proper maintenance.
It is very important to read the manual carefully and completely before completing
any task on the dispenser.
The dispenser uses progressive cavity volumetric pumps to dispense colourants for the
purpose of tinting paint either sequentially (A100) or simultaneously, up to 4 colourants
(A150). Do NOT run the pumps, either manually or automatically, if there is no
colourant in the canisters. Should this occur, the pumps will be irreparably
damaged.
The maximum allowable time between agitation cycles is 36 hours.
Always follow the recommended maintenance procedures and schedule to ensure the best
possible operation of the dispenser. Where and when appropriate, these procedures
should be completed by duly authorized and trained personnel. For optimum performance
the dispenser needs to be installed and operated within the following guidelines:
· Room temperature: 15-40°C
· Relative humidity: 30-90%
The dispenser must be connected to a dedicated electrical outlet with an appropriate
ground.
Failure to comply with the above listed requirements will invalidate the dispenser’s
warranty.
For technical assistance, please contact the vendor’s Customer Service department.
This handbook should be kept in a safe place

Related product manuals