HERO GLAMOUR - Suspension; Front and Rear Suspension Inspection

44
NOTE
If proper adjustment cannot be obtained by
this method, visit your Authorised Hero
MotoCorp workshop.
•
Apply the brake several times and check for
free wheel rotation when released.
When the brake is applied, an arrow (1), fixed
to the brake arm (2), moves towards a
reference mark (3) on the brake panel (4). If
the arrow aligns with the reference mark on
full application of the brake, the brake shoes
must be replaced.
(g) Brake wear indicators
(Drum type)
Front brake wear indication
Rear brake wear indication
3
1
4
(1) Arrow (2) Brake arm
(3) Reference mark (4) Brake panel
2
4
3
(1) Arrow (2) Brake arm
(3) Reference mark (4) Brake panel
1
SUSPENSION
•
Check the front forks by locking the
front brake and pumping the front fork up
and down vigorously. The suspension action
should be smooth and there should be no oil
leakage.
Front and rear suspension inspection
Front Rear
2