34
Recommended plug : NGK-CPR 8 EA 9
Tighten a new spark-plug 1/2 turn
after the plug seats, with a spark plug
box wrench to compress the washer. If
you are reusing a plug, it should only
take 1/8-1/4 turn after the plug seats.
(1) Noise suppressor cap (2) Spark plug
1. Clean dirt around the spark plug base.
2. Disconnect the noise suppressor cap
(1) and remove the spark plug (2) with
the help of spark plug box wrench
provided in the tool bag.
number, consult Authorised Hero
MotoCorp workshop on this if required.
1
2
0.8-0.9 mm
To Next Page
Loading...
