HERO PLEASURE+ - Starting the Engine; Engine Starting Procedures and Running-In

37
•
Use kick starter:
•
Continue warming up the engine until it
runs smoothly and responds to the throttle,
when the bystarter knob is at “OFF”
position (B).
With the throttle closed and brake lever
(front or rear) pressed, press the starter
switch.
The rear wheel must be locked when
moving the vehicle off the main stand or it
may result in loss of control.
Review vehicle safety (pages 4) before you
ride.
•
Use starter switch:
• Make sure the throttle is closed and
the integrated brake is locked before
moving the vehicle off the main stand.
With the throttle closed, operate the kick
starter with a rapid and continuous motion.
Ensure your vehicle's future reliability and
performance by paying extra attention to how
you ride during the first 500 km.
•
Do not use the bystarter.
With the throttle closed, operate the kick
starter with a rapid and continuous motion.
•
Use kick starter:
RIDING
RUNNING-IN
Warm engine
During this period, avoid full-throttle starts
and rapid acceleration.
(3) Ignition switch
(4) Bystarter knob
(A) Fully “ON” (B) Fully “OFF”
B
A
4
Cold engine
•
Pull the bystarter knob (4) out all the way to
fully “ON” position (A).
•
Use starter switch:
With the throttle closed and brake lever
(front or rear) pressed, press the starter
switch.
3