To Next PageTo Next PageHow to troubleshoot the electrical system on a HERO MAESTRO EDGE 2021 Scooter?
To troubleshoot electrical issues on your HERO Scooter, begin by checking the fuse. Next, inspect the battery and then check the bulbs. Finally, check all electrical connections to ensure they are secure.
What to do if HERO Scooter engine does not start?
If your HERO Scooter's engine isn't starting, several factors could be at play. Here's a checklist to troubleshoot the issue: * Check the fuel level in the fuel tank. * Inspect the fuel lines for any blockages or damage. * Verify the fuse isn't blown. * Examine the battery condition. * Ensure the connections to the starter switch and stop switch are secure. * Inspect the spark plug for fouling; consider replacing or adjusting it. * Check the ignition switch. * Make sure all connections are properly connected and secured, including the spark plug wire.
Why does my HERO MAESTRO EDGE 2021 engine start but then stall?
If your HERO Scooter starts but stalls shortly after, there are a couple of things you can check. Make sure to check the choke knob position and inspect the air cleaner element.
What to do if HERO MAESTRO EDGE 2021 Scooter has poor pick up?
If your HERO Scooter isn't accelerating as it should, consider these potential issues: * Ensure the spark plug is properly tightened in the cylinder head. If it was loose, tighten the spark plug. * Check the air cleaner element for blockages. * Inspect the brakes for any binding. * Verify the tyre inflation pressure is at the correct level.
How to fix i3s system issues on HERO Scooter?
To address i3s system problems on your HERO Scooter, start by checking the i3s switch. Also, inspect the fuse and check the i3s controller. Ensure you check the painted groove on the switch plunger.
General| Engine Displacement | 110.9 cc |
|---|---|
| Power RPM | 7500 rpm |
| Torque RPM | 5500 rpm |
| Fuel Tank Capacity | 5 liters |
| Brakes (Front) | Drum |
| Brakes (Rear) | Drum |
| Kerb Weight | 112 kg |
| Seat Height | 775 mm |
| Front Suspension | Telescopic Hydraulic Shock Absorbers |
| Rear Suspension | Unit Swing with Spring Loaded Hydraulic Damper |
| Engine Type | Air-cooled, 4-Stroke, SI Engine |
Explains the location and format of the Vehicle Identification Number (VIN).
Explains the location and format of the Engine Number.
Lists the vehicle's length, width, height, wheelbase, saddle height, and ground clearance.
Specifies the kerb weight of the vehicle.
Details engine oil, transmission oil, and fuel tank capacities.
Lists engine power, torque, bore, stroke, compression ratio, and valve clearance.
Describes chassis type, suspension, caster angle, and tyre sizes.
Outlines transmission type and lists electrical components like battery and fuses.
Key recommendations for safe riding practices and vehicle readiness.
Guidelines for choosing and wearing appropriate protective gear.
Information on vehicle weight capacity and proper loading procedures.
Warnings and recommendations regarding vehicle accessories and modifications.
Recommended actions and actions to avoid for safe riding.
Advice for maintaining the vehicle and protecting the environment.
Identifies controls and indicators on the top part of the vehicle.
Identifies components on the left side of the vehicle.
Identifies components on the right side of the vehicle.
Details the function of dashboard indicators and meters.
Instructions for setting the digital clock time and date.
Explains how to use the odometer and tripmeter functions.
Describes the fuel gauge, low fuel warning, and service reminder indicators.
Explains the integrated braking system, adjustment, and rear brake operation.
Information on the fuel tank, opening, closing the lid, and using gasohol.
Guidance on tyre types, inflation, inspection, wear, and repair.
Explains the functions of the ignition switch and key positions.
Explains the switches on the left handlebar grip.
Explains the switches on the right handlebar grip.
Information on the i3s system switch and its operation for starting/stopping.
Guidance on using the i3s system in OFF mode and general riding notes.
Instructions for pairing smartphone via Bluetooth for navigation and alerts.
Steps to use the navigation feature and understand navigation prompts.
Explains automatic reconnection and how call alerts are displayed.
How missed call and low battery alerts are displayed on the meter console.
Instructions on locking steering, fuel lid, and seat.
Information about helmet holders and storage compartments.
Details on front and rear luggage hooks and their weight limits.
Operation and function of the side stand and pillion footrests.
Steps to remove the center compartment.
Instructions for removing the vehicle's body covers.
Procedure for removing and installing rear view mirrors.
Steps for installing the headlamp assembly and adjusting its focus.
Essential checks to perform before every ride for safety.
Troubleshooting steps for engine starting problems.
Solutions for when the engine starts but then stalls.
Addresses issues related to the vehicle's acceleration and performance.
Troubleshooting steps for electrical system faults like lights and horn.
Diagnosing and resolving problems with the i3s system.
Visual guide to navigation prompts displayed on the meter console.
Highlights the advantages of using genuine Hero MotoCorp spare parts.
