(1) Tool kit (2) Center compartment
58
Avoid cleaning products that are not
specifically designed for vehicle or automobile
surfaces. They may contain harsh detergents
or chemical solvents that could damage the
metal, paint and plastic parts on your vehicle.
CLEANING OF VEHICLE
Clean your vehicle regularly to protect the
surface finishes and inspect for damage, wear
and oil leakage.
If your vehicle is still warm from recent
•
Tool bag
Some roadside repairs, minor adjustments and
parts replacement can be performed with the
tools available in the kit.
TOOL KIT
•
Spanner 14 mm
•
+,-No. 2 driver
•
Wrench plug 16 mm
The tool kit (1) is located in the center
compartment (2).
•
Grip
1
2
CAUTION
!!
•
We at workshop take all above mentioned
precautions like recommended detergents
and usage of muffler caps/plugs during
wash to ensure quality wash.
•
High pressure water (or air) can damage
certain parts of the vehicle.
•
Rinse the vehicle thoroughly with water to
remove loose dirt.
•
Clean the vehicle with a sponge or soft cloth
using water.
WASHING OF VEHICLE
•
Avoid directing water to muffler outlets and
on electrical parts.
•
Clean the plastic parts using a cloth or
sponge dampened with a solution of mild
detergent and water. Rub the soiled area
gently rinsing it frequently with fresh water.
operation, give time for the engine and
exhaust system to cool down.
We recommend avoiding the use of high
pressure water spray.
•
Take care to keep brake fluid or chemical
solvents off the vehicle. They will damage
the plastic and painted surfaces.
•
The inside of the headlamp lens may be
clouded immediately after washing the
vehicle. Moisture condensation inside the
headlamp lens will disappear gradually by
lighting the headlamp in high beam.
NOTE
To Next Page
Loading...
