How to view old alarms
Old alarms are those which have been previously viewed in the “alarm memory”. The
most recent old alarm is distinguished by -01 at the top right hand side, and the
second most recent old one has -02, etc. Use [
▲
] to analyse the oldest alarms. If
there are no new alarms, and the dialler has been functioning for a duration of time,
enough to report 64 or more than 64 alarms, the oldest alarm will be distinguished with
-64.
The oldest alarms are overwritten by the most recent ones. In case there are 10 new
alarms (indicated by +), the old ones will be 54 maximum (the last of which is -54).
Hereunder is typical information recorded in the alarm memory. When “ALARM
MEMORY” is viewed, and [OK] is pressed, the display will view the first new alarm
(+01). Other memorised alarms can be viewed using the [
▲
] and [
▼
] arrow keys to
run the list upwards and downwards.
Viewing
ALARM MEMORY–60
IN.1 20/05 13:13
The least recent old alarm
ALARM MEMORY –59
IN.4 20/05 12:13
ALARM MEMORY –02
IN.1 20/05 12:13
ALARM MEMORY –01
IN.2 10/05 10:13
ALARM MEMORY +01
IN.4 20/06 20:20
The most recent old alarm
The first new alarm
INFORMA
600
-
Multifunction phone dialler with voice synthesis
17
To Next Page