HESA INFORMA 600 - Page 39

F unction Press key
Check the system status [1]
Alarm memory [2]
Clock function [3]
Phone numbers programming [4]
Modify code [5]
To execute commands [6]
SIM expiry date [7]
To end [0]
To play again [#]
When a new phone number is programmed, remember to press [*1] to enter a two-
second pause with the exclusion of switchboards function (check by listening to the “E”
message), [*2] to enter a two-second pause (check by listening to the beep), [*3] to
enter the number *, [*4] to enter the number #, and [*0] to cancel the digitations of the
new phone number
PROGRAMMING WITH A REMOTE-CONTROL
SOFTWARE
The programming can be carried out in a simple and quick way, by saving the
programming of the dialler, using the remote-control software for Windows INFORMA
600.
The programming can be done locally, using the serial cable, and remotely with the
SMS MODEM.
36 INFORMA 600 - Multifunction phone dialler with voice synthesis