HGI Generators HRD060D - Data Plate

Harrington Generators International
498-1084 2 HRD060D Diesel Generator
Certication
Data Plate
Each generator supplied will have a data plate attached to the canopy of the set. Below is an exemplar data
plate with notes to help understand the terminology and information supplied on the data plate of your machine.
This is the “CE” mark and indicates that the generator complies with the
European Directives as detailed in the Certicate of Conformance
Model: This is the build model of the machine e.g. SKD60C3
Build Code:
This is a code number, which tells us the exact build standard to which the
generator was built. This is important when ordering spares or contacting our
Technical Help Line
Serial No:
This is a unique number, which identies the generator. This is important when
ordering spares or contacting our Technical Help Line
Year of Manufacture:
Year of Manufacture e.g. 2013
Electrical Power: This is the power in kVA and kW, the power factor and frequency
Voltage: This is the nominal voltage e.g. 400V, 230V or 110V
Current Amps: This is the nominal electrical current of the principal voltage
Performance Class
LTP “Limited Time Performance” means the generator should not be used
continuously but will typically run for 8 hours a day. G1 is for general purpose
use and the generator is not suitable to power sensitive specialist electronic
equipment
Sound Pressure Level:
This is the level of sound produced by the generator when running at 75%
auxiliary power. This generator complies with the CE Directive on sound levels
Maximum Altitude /
Ambient Temperature:
These are given and if the generator is to be used at higher altitudes or at higher
ambient temperatures HGI should be consulted
Weight: This provides weights including and excluding a full tank of fuel
Fuel:
Only commercially available diesel fuel can be used. If a special type of diesel is
to be used please consult HGI rst to discuss its suitability