EasyManuals Logo

HGST Ultrastar 7K2 User Manual

HGST Ultrastar 7K2
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Ultrastar 7K2
HGST Hard Disk Drive
Technical Reference Manual
9
S
PECIFICATION
Table 1 Physical Specifications
Physical Specifications
1
HUS722T2TALA604 HUS722T1TALA604
Capacity 2 TB 1 TB
Interface SATA 6 Gb/s SATA 6 Gb/s
Physical Bytes Per Sector 512 512
Host Bytes Per Sector 512 512
User Sectors per Drive 3,907,029,168 1,953,525,168
Servo Type Embedded Embedded
Channel Recording Method LDPC–Low Density Parity Code
1
As used for storage capacity, one megabyte (MB) = one million bytes, one gigabyte (GB) = one billion bytes,
and one terabyte (TB) = one trillion bytes. Total accessible capacity varies depending on operating
environment. As used for buffer or cache, one megabyte (MB) = 1,048,576 bytes. As used for transfer rate
or interface, megabyte per second (MB/s) = one million bytes per second, and gigabit per second (Gb/s) =
one billion bits per second. Effective maximum SATA 6 Gb/s transfer rate calculated according to the Serial
ATA specification published by the SATA-IO organization as of the date of this document. Visit www.sata-
io.org for details.
Performance Specifications
Table 2 Performance Specifications
Average Seek (without overhead)
- Read
- Write
7.7 ms average
8.3 ms average
Average Latency 4.2 ms (nominal)
Rotational Speed 7200 RPM (nominal)
Data Transfer Rate (maximum at OD)
1
- Maximum burst interface transfer rate
- Maximum sustained interface transfer rate
6 Gb/s
HUS722T2TALA604: 200 MB/s
HUS722T1TALA604: 184 MB/s
Buffer Size 128 MB
Spindle Start Time
- From Power-on to Drive Ready
2
15s average (FAST spinup mode)
18s average (STANDARD spinup mode)
Spindle Stop Time <10s average
Load/Unload Cycles
3
600,000 minimum
1
As used for transfer rate or interface, megabyte per second (MB/s) = one million bytes per second, and gigabit per
second (Gb/s) = one billion bits per second. Effective maximum SATA 6 Gb/s transfer rate calculated according to the
Serial ATA specification published by the SATA-IO organization as of the date of this document. Visit www.sata-io.org
for details.
2
Defined as the time from power-on to the setting of Drive Ready and Seek Complete including calibration.
Controlled unload at ambient condition.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HGST Ultrastar 7K2 and is the answer not in the manual?

HGST Ultrastar 7K2 Specifications

General IconGeneral
BrandHGST
ModelUltrastar 7K2
CategoryStorage
LanguageEnglish

Related product manuals