Qmini series industrial GIS data collector manual
- 20 -
Figure 4-17 Turn off Qmini series industrial GIS data collector
2. Long press “ ”button for 3 seconds to turn off industrial GIS data collector.
4.8 Collect data
1. Install Microsoft ActiveSync
Double-click MSASYNC45.exe from the CD(Tools software \ Connect program\ActiveSync\), then
follow the instruction to finish installing. After installing, run the Microsoft ActiveSync in “Start menu” ->
“Program”. Setup”Allow to connect by USD” in the “Connect setup”.Figure 4-18
Figure 4-18 USB connecting setup
2. Hardware connect
Turn on the Qmini series industrial GIS data collector, go into Windows system, no need to open
Application program. Connect Qmini series industrial GIS data collector with small USB port cable, the
other USB plug connect to computer USB port. Such as figure 4-19.
Figure 4-19 data transmit connecting
To Next Page
Loading...
