52 September 2018
Printing preferences PLT-02931, Rev. A.0
Use K Resin to Print Black in Images: Prints black in images using K-panel resin (white or color
backgrounds) and automatically selects Print YMC under K Resin.
Print YMC under K Resin: Clear this check box to print black in image using K-panel resin
(white or color backgrounds).
YMC Black Text (Default is K): This option prints black text with YMC instead of K.
K Resin Threshold in Images: When Use K Resin to Print Black in Images is selected, this
option sets the K resin usage limit.
႑ Lower limit = 1
႑ Upper limit = 255
Default: Click this button to return the listed threshold to the factory setting.
Color Correction Default: Sets the optimal and most accurate color setting for this device.
Legacy: Attempts to duplicate the HDP5000 color settings.
None: Uses the uncorrected output from the printhead.
Defined Areas Adds and removes defined areas for K resin and color correction.
Enable Defined Area: Select the type of area to add. Each defined area is represented by the
following colors:
K Resin:
႑ Active: Gray
႑ Keep Out: Cyan
Color Correction:
႑ Active: Green
႑ Keep Out: Yellow
Set Alignment PRN: Click this button to retrieve a saved print file to verify the defined
locations on your card.
Add Area: Defines additional areas. Select K Resin or Color Correction from the drop-down
list.
Print Image
Menu option Description
To Next Page
Loading...
