70 September 2018
Printing preferences PLT-02931, Rev. A.0
3.4.5 Self tests
Provides the ability to run control feature commands resident in the firmware to exercise motors and sensors in the
printer. These tests allow you to isolate printer functions and run them to determine operational status.
Font Changes the font of the sample text on the card. This field is available when the Show Text
option is selected.
Color Changes the color of the sample text on the card. This field is available when the Show Text
option is selected.
Size Changes the font size of the sample text on the card. This field is available when the Show
Text option is selected.
Field Description
Poll for Sensor Status When selected, each sensor is checked at the interval specified by the Polling Interval:
(sec.) field.
Update Display When selected, the Printer Display Panel reflects what is shown on the printer display.
Polling Interval: (sec.) Sets the number of seconds to wait before each check of the printer status. Available
values are 1 to 30 seconds.
Field Description
To Next Page
Loading...
