September 2018 71
PLT-02931, Rev. A.0 Printing preferences
Sensor/Value Shows the list of printer sensors and their default values.
Printer Display Panel Shows the current printer display. This window updates as the printer status changes.
Mechanical Tests Lists the available mechanical tests.
႑ Raise the Printhead
႑ Lower the Printhead
႑ Home the Flipper Table
႑ Ribbon Sensor Calibration (Remove Ribbon)
႑ Advance the Stepper Motor (Remove Cards)
႑ Reverse the Stepper Motor
႑ Run Ribbon Take-up Motor (Remove Ribbon)
႑ Run Ribbon Supply Motor (Remove Ribbon)
႑ Run Printhead Lift Motor
႑ Calibrate the Film Sensors
႑ Restart the Printer
႑ Cycle the Transfer Head Lift Motor
႑ Run Film Supply Motor (Remove Film)
႑ Run Film Take-up Motor (Remove Film)
Self Tests Lists the available tests.
႑ Alignment Self Test
႑ Device Settings Self Test
႑ Resin Self Test
႑ Color Photo 1
႑ Color Photo 2
Run Test Click this link to run the selected mechanical or self test.
Field Description
To Next Page
Loading...
