80 September 2018
Printing preferences PLT-02931, Rev. A.0
Flattener TOF offset Adjusts the position of the card when the flattener roller engages.
Job Canceling Timeout Period Slower PCs can have difficulty canceling all print jobs. Increase this value if all print
jobs do not get canceled and instead some restart printing.
Ribbon Queueing Position
Offset
Fine tunes the position of the ribbon prior to printing. Adjust if printing starts in the
previous panel or goes off into the next panel.
Mag Verify If set to 1, enables verification of encoded mag data.
Setting Description
To Next Page
Loading...
