To Next Page

To Previous Page

August 2005 Page 13 of 23

VertX V2000 (CS) Quick Installation Guide

5. Enter the IP address 10.19.4.130. If the VertX board’s IP address is different than what is

shown, the computer IP address must be modified accordingly. The two IP addresses need to

be in line with each other and separated by one digit (for example: 10.19.4.130 is one digit

greater than 10.19.4.129).

6. Enter the Subnet mask: 255.255.0.0.

7. Enter the Default gateway: 10.19.0.1.

8. Click OK.

9. Click the OK button again to complete the computer configuration.

10. Restart your computer.

Questions and Answers:

Need help?

Do you have a question about the HID VertXHID V2000 and is the answer not in the manual?

HID VertXHID V2000 Specifications

General