HID X001800 - Technical Specifications

September 2017 11
PLT-03159, Rev A.0 Specifications
1.3 Technical Specifications
Term Function
Print Method Dye-sublimation / Resin thermal transfer
Print resolution 300 dpi (11.8 dots/mm); continuous tone
Colors Up to 16.7 million colors / 256 shades per pixel
Print Ribbon Options Full-color with resin black and overlay panel, YMCKO* (500 prints)
Full-color with two resin black panels and overlay panel, YMCKOK* (500 prints)
Full-color with two resin black panels, YMCKK* (500 prints)
Full-color (1/2) with resin black overlay panel, YMCKO* (850 prints)
Full-color (1/2) with two resin black overlay panels, YMCKOK* (650 prints)
Full-color (1/2) with two resin black overlay panels, YMCKOKO* (500 prints)
Resin black standard (3000 prints)
* Indicates the ribbon type and the number of ribbon panels printed where:
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay
Print Speed 6 seconds per card (K*)
8 seconds per card (KO*)
16 seconds per card (YMCKO*)
24 seconds per card (YMCKOK*)
Print speed indicates an approximate batch print speed and is measured from the
time a card feeds into the printer to the time it ejects from the printer.
Print speeds do not include encoding time or the time needed for the PC to process
the image.
Process time is dependent on the size of the file, the CPU, amount of RAM and the
amount of available resources at the time of the print.
* Indicates the ribbon type and the number of ribbon panels printed where:
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay
Card Size and Types
Supported
CR-80 3.375"L x 2.125"W (85.6 mmL x 54 mmW)
CR-79 3.313”L x 2.063”W (84.1 mmL x 52.4 mmW)
Accepted Standard
Card Sizes
CR-80 edge-to-edge 3.36"L x 2.11"W (85.3 mmL x 53.7 mmW)
CR-79 3.3”L x 2.04”W (83.8 mmL x 51.8 mmW)
Accepted Card
Thickness
Print only: 0.009˝ - 0.040˝ / 9 mil - 40 mil / 0.229 mm - 1.016 mm; print / lamination:
0.030˝ - 0.040˝ / 30 mil - 40 mil / 0.762 mm - 1.02 mm
Accepted Card
Types
PVC or polyester cards with polished PVC finish; monochrome resin required for
100% polyester cards; optical memory cards with PVC finish; rewrite.
Input Hopper Card
Capacity
100 cards 0.030” (0.762 mm)
Output Hopper Card
Capacity
100 cards 0.030” (0.762 mm)
Reject Hopper Card
Capacity
100 cards 0.030” (0.762 mm)
Card Cleaning Card cleaning roller integrated into the ribbon drawer.
A new cleaning roller is included with each ribbon.
Printer Memory 32MB RAM