September 2017 43
PLT-03159, Rev A.0 Printer Preferences
4.2 Device Options Tab
Use the Device Options tab to select the Supplies, Dual Sided, and Options areas.
Field Description
Supplies
Automatically detect the
installed Ribbon for every
print job
When this box is checked, the printer always sends the job for the ribbon that is
currently installed in the printer. When this box is cleared, you can select the
ribbon type you want to use to print regardless of what is in the printer.
Ribbon Type
Indicates the ribbon that is currently installed in your printer or you can select a
ribbon type to create a print job.
Dual Sided
Print Both Sides
Split 1 Set of Ribbon Panels: When using a YMCK ribbon, this selection allows
you to print YMC on the front of the card and K on the back. Normal operation is
to print YMCK on the front and YMCK on the back.
Print Back Image on Front of Card: Reverses the order of printing.
Print Back Side Only Prints only the backside image.
To Next Page
Loading...
